<< Previous item Next Item >>
Creative Labs X-Fi Elite Pro Sound Blaster - PCI - 24-bit - 192 kHz - 116dB SNR - 7.1, 70SB055000002

Creative Labs X-Fi Elite Pro Sound Blaster - PCI - 24-bit - 192 kHz - 116dB SNR - 7.1, 70SB055000002

SKUSC_SB_X-FI_ELITE_PRO7.1
Your Price $379.00
Quantity
 

Specification

  • Mfr Part Number: 70SB055000002
  • Technical Specifications:
    • 24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
    • 24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 7.1 speaker output
    • 24-bit Digital-to-Analog conversion of stereo digital sources at 192kHz to stereo output
    • 16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
    • ASIO 2.0 support at 16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring.
  • Enhanced SoundFont support of up to 24-bit resolution
  • 64MB of X-RAM
  • Audio Performance (Rated Output @ 2Vrms, Typical Value)
    • Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted); Stereo Output 116dB; Front and Rear Channels 116dB; Center, Subwoofer and Side Channels 116dB
    • Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter) = 0.0008%
    • Frequency Response (-3dB, 24-bit/96kHz input ) = <10Hz to 46kHz
    • Frequency Response (-3dB, 24-bit/192kHz input) = <10Hz to 88kHz (Stereo only)
  • Connectivity:
    • FlexiJack (Performing a 3-in-1 function, Line In / Microphone / Digital Out) via 3.50 mm minijack
    • Line level out (Front / Rear / Side / Center / Subwoofer) via 3.50 mm minijacks
    • AUX_IN line-level analog input via 4-pin Molex connector on card
    • One AD_Link (26 pin) connector for linking to the X-Fi I/O Console (upgrade option)
  • I/O Console Connectivity:
    • Two RCA jacks for coaxial SPDIF input and output
    • Shared Auxiliary input / Phono input via RCA stereo jacks
    • Two optical connectors for optical SPDIF input and output
    • Two standard MIDI female connectors for MIDI input and output
    • Headphone output and volume control via 6.35 mm (1/4-inch) stereo jack
    • Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jack
    • Shared line-level analog Line/Hi-Z input via 6.35 mm (1/4-inch) stereo jack
    • DIN jack to connect Creative analog speaker systems with the wired remote control or Audio Control Pod that comes with the speakers.
    • One AD_LINK connector for linking to the audio card
  • Package came with Sound Blaster X-Fi Elite Pro PCI Card, X-Fi I/O Console, and Remote Control

    Customer Reviews


    Write A Review